







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fremont Homeowners Choose Toto Construction
Rowan Construction Group Fremont provides independent Toto construction service in Fremont: we repair, replace, and remodel around Toto toilets, Washlet bidet seats, and Toto fixtures, and we put a written flat price in front of you before any work starts. What sets our Toto work apart is parts-level familiarity. We know the 3-inch flush tower inside a Drake, the inlet filter that quietly starves a Washlet C5, and why a one-piece Ultramax II leaks at the base without the bowl ever cracking. We’re an independent service provider, not affiliated with or authorized by Toto, and we don’t pretend otherwise. Call (866) 797-6171 for a free estimate.
Why Trust Rowan Construction Group Fremont for Your Toto Construction?

Our technicians have up to 19 years of experience, and that experience includes time with Toto’s specific parts ecosystem rather than generic toilet work. Toto builds its fill and flush assemblies to its own dimensions. A Drake CST743 or CST744 two-piece doesn’t take the same tower as a builder-grade toilet from the same decade, and a Washlet seat is electronics as much as plumbing. Familiarity with those parts is what our referral network screens for when a Fremont homeowner asks for Toto help.
We use genuine Toto OEM fill valves, flush towers, and Washlet components wherever they’re still available, because a knockoff flush assembly is the leading cause of repeat running-toilet callbacks. We reserve quality aftermarket parts for what they’re actually good for: seals, supply lines, wax rings. Warranty-safe practice matters too. We don’t modify a Toto fixture in ways that would give a manufacturer grounds to walk away from a claim, and we’ll tell you plainly when a part is still under coverage. Under Clause 1 of The Haven Standard, the price is written before anyone starts, so you’re never guessing what a Toto repair will cost after the tank is already off.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Fremont
These are the Toto failures we see most often in Fremont bathrooms. Each one has a real cause, and none of them means the whole fixture is finished.
- Drake and Ultramax II running or refilling forever. The 3-inch flush tower hangs, fails to seal, or the fill valve scales up and never shuts off. Homeowners read this as a “broken toilet.” It’s usually a valve and tower replacement, not a new fixture. Left alone, a running Toto wastes water by the gallon and can stain the bowl with mineral buildup.
- Washlet C5 and S550e seats that stop heating or spraying. Hard-water East Bay supply clogs nozzles and scales the self-cleaning wand. Seat heaters and control boards burn out after a few years of daily use. The inlet filter is the first thing to check before anyone condemns the seat.
- One-piece Ultramax II (MS604114CEFG) leaking at the skirted base. A failing wax seal or loose closet bolts show up as a slow leak that stains the floor or the ceiling below. The skirt hides the joint, so the leak travels before it’s obvious. This is a base-seal job, not a bowl replacement.
- Ceramic glaze and bowl-rim wear. Prior over-tightened closet bolts and harsh chemical cleaners pit the glaze and hairline-crack the rim. Once the ceramic is compromised, repair-vs-replace math changes, and we say so.
- Aquia and Eco/Marathon high-efficiency toilets with weak flushes. Mineral scale and a worn flapper cut flush volume on high-efficiency models that were tuned tight from the factory. Restoring the fill and flush parts usually brings the flush back.
Toto Parts & Our Repair-vs-Replace Approach

We use genuine Toto OEM fill valves, flush towers, and Washlet components wherever they’re still available. Knockoff flush assemblies are the number-one cause of repeat running-toilet callbacks, so we don’t put them in. Quality aftermarket is fine for seals, supply lines, and wax rings, where the part is simple and the spec is universal. We don’t claim to stock Toto parts locally; parts are sourced per job, and we tell you the lead time before you commit.
Repair versus replace is an honest call, not an upsell. A Drake with a worn tower gets a tower. A Washlet control board or an older one-piece bowl that’s beyond economical repair gets a plain explanation, not a parts chase. Here’s how the repair work usually runs: a Drake or Ultramax II that runs intermittently or won’t stop refilling is typically a worn 3-inch flush tower or a scaled fill valve, and a qualified pro pulls the tank, replaces the OEM valve and flapper or tower, checks the supply stop and shutoff, and pressure-tests for a silent leak at the base. When a Washlet seat won’t heat or spray, the diagnosis runs to the control board or inlet filter before anyone recommends a new fixture. Call (866) 797-6171 and we’ll price the repair in writing before we start.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We identify the exact Toto model and series, then trace the symptom to its part family: flush tower, fill valve, Washlet inlet filter or control board, or base seal. You get a written description of what we found.
- 2
Written price and scope. Before any work starts, you receive a flat written price and a written scope covering the Toto parts and labor. No work proceeds on a change until a change order is signed.
- 3
Repair or install. We replace Toto OEM parts or install your fixture to manufacturer spec, with background-checked, uniformed technicians on site.
- 4
Test. We cycle the flush, check for silent leaks at the base, verify fill and shutoff, and run the Washlet through its functions where one is involved.
- 5
Photo record and warranty. Every visit includes a documented photo record of what was found and what was done, plus a written warranty and the 365-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Fremont
Our Toto work covers the model families Fremont homeowners actually have in their bathrooms. That includes the Drake two-piece line (CST743 and CST744) and the Ultramax II one-piece (MS604114CEFG), along with Aquia and Eco/Marathon high-efficiency toilets. On the electronics side, we service and install Washlet C5 and S550e bidet seats, including nozzle cleaning, control board diagnosis, and inlet filter service. We install vanities and tile around existing Toto fixtures during a remodel, and we set new Toto toilets and Washlets into remodeled baths. During a bathroom remodel, our Tile & Fixtures, Bathroom Remodel, and Vanities work keeps Toto fixtures at the center of the layout rather than swapped out for builder-grade. Call (866) 797-6171 to price Toto service for your model.
We Also Service These Brands
Rowan Construction Group Fremont is a multi-brand construction contractor, not a single-brand shop. Alongside Toto, we service and install KraftMaid and Wellborn cabinets, Kohler fixtures, GAF and Owens Corning roofing, and PGT windows and doors. If your bathroom mixes Toto with Kohler, or your kitchen remodel runs from KraftMaid cabinets to a Toto Washlet in the powder room, one written quote can cover the whole scope. That breadth is what keeps our Toto quotes honest rather than padded.
FAQs – Toto Construction Service in Fremont

You don’t need a Toto dealer for routine Washlet service. We’re an independent service provider, not affiliated with or authorized by Toto, and we service Washlet C5 and S550e seats directly, from nozzle and wand cleaning to inlet filter checks and control board diagnosis. When a seat is beyond economical repair, we say so rather than chasing parts. Call (866) 797-6171 to schedule a Toto Washlet service visit.
A Toto Drake that keeps running is usually a worn 3-inch flush tower or a scaled fill valve, not a failed toilet. The tower fails to seal or hangs, and the fill valve never fully shuts off, so water runs continuously. Pulling the tank and replacing the OEM tower and valve, then checking the supply stop and pressure-testing the base, fixes most Drake and Ultramax II running issues. Call (866) 797-6171 for a written price.
A full bathroom remodel in Fremont runs $9,000 – $28,000, and a small bathroom remodel runs $5,000 – $12,000. Bathroom vanity installation runs $800 – $3,000, and tile and flooring runs $2,000 – $6,500. Keeping your existing Toto toilet and Washlet usually trims the scope compared with swapping in new fixtures. Call (866) 797-6171 for an exact quote. Estimates are free.
| Service | Fremont Price Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Tile & Flooring | $2,000 – $6,500 |
You can, and often should. Your Toto toilet and Washlet can be protected, pulled, and reset into a remodeled bath, which saves the cost of a new fixture. The one caveat is the base seal. Remodel work moves the floor and footing under the bowl, so the wax seal and closet bolts get reset and pressure-tested for a silent leak before the job is closed out. Call (866) 797-6171 to plan a remodel around your existing Toto fixtures.
We cover the Drake two-piece line (CST743 and CST744), the Ultramax II one-piece (MS604114CEFG), Aquia and Eco/Marathon high-efficiency toilets, and Washlet C5 and S550e bidet seats. We also install vanities and tile around existing Toto fixtures. If your model isn’t listed, call (866) 797-6171 and we’ll confirm coverage.
Correctly performed service with genuine Toto OEM parts doesn’t void your Toto warranty, and we don’t modify fixtures in ways that would give a manufacturer grounds to walk away from a claim. We use OEM fill valves, towers, and Washlet components wherever they’re still available. When a part is still under coverage, we tell you plainly. Call (866) 797-6171 for a service visit priced in writing.
Book Your Toto Service in Fremont, CA
Whether it’s a running Drake, a Washlet that won’t heat, or a Fremont bathroom remodel built around the Toto fixtures you already own, you get a written flat price before any work starts, a documented photo record when the crew leaves, and the 365-Day Done Right Promise backing the result. Call (866) 797-6171 for a free estimate.
Written by the team at Rowan Construction Group.












