







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat It Costs to Hire a General Contractor in Fremont, CA
Hiring a general contractor in Fremont usually runs 15% to 25% of total project cost, which on a typical $200,000 to $600,000 remodel works out to roughly $30,000 to $150,000 in GC fees alone. But the percentage is rarely what breaks a budget here. The real swing comes from discovery items a contractor already knows to expect in Fremont’s older tracts: unpermitted additions, aluminum wiring, galvanized plumbing, and seismic bolting that surface after demo. A contractor who prices those in writing keeps the fee the least surprising line on the invoice. Call (866) 797-6171 for a free written estimate.

Why Fremont Budgets Move After Demo
Most Fremont homeowners open with “what percentage does the GC charge?” The better question is whether that percentage sits on top of a scope the contractor already priced honestly. In a built-out city where nearly all new square footage comes from tearing down or adding to 1950s-70s ranchers, the surprises are predictable. We see the same handful on repeat.
Fremont’s older tracts in Sundale and Glenmoor were built on slab-on-grade with shallow footings. Add a room near the Hayward Fault zone and the city will often require a foundation and bolting upgrade to the existing house before it signs off on the new work. That’s a real line item, not a footnote. Older homes in Brookvale and the post-war subdivisions frequently carry aluminum wiring and aging galvanized plumbing, both of which have to be sorted out before new construction can pass inspection. The foothills bring expansive clay, and down by the shoreline the soils shift to bay mud with high groundwater, so foundation and drainage design change block to block.
The pattern is what matters for your budget: these aren’t rare events. They’re the expected condition of the housing stock. A prepared contractor builds a written contingency line for them. An unprepared one issues change orders after the drywall is open and the rooms are torn apart.
How GC Fee Structures Actually Work on a $200K-$600K Fremont Project
There are three ways a Fremont general contractor quotes the fee, and they behave very differently when a discovery shows up.
- Cost-plus (typically 15-25% on top of actual costs): The final number tracks whatever the job actually consumes. Transparent only if the contractor logs every cost and shows you the receipts. Easy to inflate if they don’t.
- Fixed-price (fee baked into a single written scope): You get one flat number with a written scope. The contractor carries the risk of overruns, so the price tends to be higher and the scope has to be airtight.
- Hybrid (fixed base plus a written contingency allowance): This is the middle path. The base is fixed, and the contingency is a named, dollar-figure line for specific probable discoveries, drawn down only with a signed change order.
Rowan Construction Group Fremont quotes every project with a flat written price and a written scope before work begins, which puts us in the fixed-and-hybrid camp. Under Clause 1 of The Haven Standard, the price is written before anyone picks up a tool. We carry the sourcing depth to make those numbers honest rather than padded: fifty-plus vetted material brands including KraftMaid and Wellborn cabinets, Cambria and Caesarstone countertops, Kohler and Moen fixtures, and GAF and Owens Corning roofing. That depth is why a written quote lands on real specs instead of a guess with a cushion.
What a Written Contingency Looks Like in Dollars
On a Fremont remodel, a contingency line is not a vague 10% slush fund. It’s an itemized list of the discoveries a contractor in this housing stock expects, each with a dollar range. Here’s the shape those lines take when we quote a project, alongside common finish allowances you’ll see pulled into the contract:
| Line item | Typical $ range |
|---|---|
| Seismic bolting / foundation upgrade (Hayward Fault zone additions) | $6,000-$18,000 |
| Aluminum wiring remediation (older post-war tracts) | $4,000-$12,000 |
| Galvanized plumbing replacement | $3,500-$9,000 |
| Unpermitted addition legalization / permit correction | $2,500-$10,000 |
| Kitchen remodel (allowance reference) | $14,000-$45,000 |
| Bathroom remodel (allowance reference) | $9,000-$28,000 |
| Home addition | $45,000-$130,000 |
| ADU construction | $90,000-$220,000 |
Those discovery ranges are drawn from what we actually see in Fremont’s older tracts, not from a statewide average. If you’re building a kitchen remodeling or home addition on a Sundale or Glenmoor lot, expect at least one of the first four lines to apply. Pricing them upfront is the whole point.

The Math on a Low-Bid GC Versus a Documented Fixed Price
Here’s the comparison that decides most Fremont budgets. Picture a $350,000 project quoted two ways.
- The low-bid GC at 10%: $35,000 fee, no written contingency, change orders issued verbally after demo. Two discoveries (say seismic bolting at $10,000 and aluminum wiring at $7,000), plus the overhead and markup that ride on every change order. Real-world overruns on unsigned verbal change orders land 15-30% above the agreed number. On $350,000, that’s $52,000 to $105,000 added after the fact, and the 10% fee was never the real cost.
- The documented fixed price at 18%: $63,000 fee, a written contingency line naming those same discoveries at fair market ranges, and Clause 1 of The Haven Standard in force: no work proceeds on a change until the change order is signed. The final invoice lands within a few percent of the agreed price because nothing moves without a signature.
Rowan has run that discipline across 4,000-plus projects since 2007, and it’s why projects finish within a few percent of the number the customer agreed to. The higher-looking percentage is the cheaper number once the surprises arrive. If you already have a competitor’s estimate, we’ll review it line by line at no charge through our Free Second Opinion offer, and you can see exactly where the discovery costs are hiding.
Permit Fees That Sit Outside the GC Fee in Fremont
The GC fee never includes Fremont Building and Safety’s own charges, and generic cost guides leave them out. Budget for these separately: plan-check fees, inspection fees, and school-impact fees, all of which scale with project size and scope. On a second-story addition or an ADU, plan-check and inspection runs higher because the review is more involved; the school-impact fee is a separate line the city collects. Add grading and erosion-control requirements if you’re on a sloped lot, since Fremont’s concentrated winter rain means the schedule has to account for rainy-season delays and inspection windows. Ask for these as written line items in the estimate, not as “miscellaneous.”
FAQs
Expect 15% to 25% of total project cost, so a $200,000 to $600,000 Fremont project carries roughly $30,000 to $150,000 in GC fees. The fee is only half the picture. The other half is whether the contractor priced the probable discovery costs (seismic bolting, aluminum wiring, unpermitted additions) in writing upfront. Call (866) 797-6171 for a written estimate with the fee and the contingency spelled out.
Repair wins on a sound structure, but on Fremont’s older slab-on-grade homes with aluminum wiring, galvanized plumbing, or an unpermitted addition, the calculation changes. Patched wiring or plumbing often resurfaces within a few years and triggers a second round of permits. Our written estimate itemizes both paths so you can compare the numbers side by side, free.
Yes. A live person answers our phones around the clock, and we schedule site visits quickly around Fremont. Every visit includes a documented photo record as a standard part of the job, so you leave with evidence of what we found and what we recommend. That record travels with your written estimate. Call (866) 797-6171.
It should include a flat price, a written scope, a written warranty, and a named contingency line for discovery costs. Any quote that says “call for a final price” or leaves discovery to a verbal change order is asking you to carry the risk. Under The Haven Standard, no work proceeds on a change until the change order is signed, backed by the 365-Day Done Right Promise. All estimates are free.
Get Your Written Price Before Anyone Picks Up a Tool
Bring us a competitor’s quote and we’ll review it line by line at no charge, or start fresh with a written price and a stated contingency for the discoveries Fremont homes are known to hide. Background-checked, uniformed technicians; calls answered by a live person 24/7; a documented photo record on every visit. Call (866) 797-6171 for a free estimate.
Written by the team at Rowan Construction Group Fremont, serving Fremont, CA.
What Our Customers Say
"Driveway replaced properly with a base that will actually last. They explained why the cheaper quote was cheaper."
- Reggie O."Solid work, decent crew, and the site was left tidy every evening."
- Pearl A."Talked us out of the larger scope we came in asking for, because it would not have added the value we thought."
- Emil R.












