







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterTub-to-Shower Conversion in Fremont, CA
A tub-to-shower conversion in Fremont typically costs $6,500 to $16,000 and takes 5 to 10 working days, depending on tile, pan type, and whether the drain and valve need moving. It’s a bathroom remodel job where the tub comes out, the drainage is reworked to a sloped shower pan, and a walk-in shower goes in its place – usually with a bench, a grab bar, or a low curb for the household member who’s stopped stepping over a 17-inch tub wall. Rowan Construction Group Fremont does this work under The Haven Standard: a flat written price before anyone touches the tile, a signed change order for any change, and a photo record of the substrate and waterproofing so you know what’s behind the wall.
It’s one of the most requested projects on our Bathroom Remodeling in Fremont schedule. Call (866) 797-6171 and we’ll get a written quote to you before the end of the week.

When You Need Tub-to-Shower Conversion
- Someone in the house can’t safely step over the tub wall. Fremont’s postwar single-story homes in the Centerville district often have the only full bath off a narrow hallway, and a 1970s cast-iron tub with a 17-inch apron becomes a fall hazard for an aging parent. A low-curb or zero-threshold shower fixes it without moving walls.
- The tub is rarely used and taking up 15 square feet. If nobody in the household has taken a bath in two years, you’re paying a mortgage on square footage you don’t use. Removing the tub usually opens room for a 48-inch vanity and a linen cabinet.
- The tub surround is failing at the caulk line. Rust stains, soft drywall behind the tile, or a tub that flexes when you stand in it – all signs the substrate has taken on water. We see this often in Ardenwood and Irvington homes built in the 1980s and 1990s where the original tub surround tile was set on greenboard.
- You want a shower with real water pressure and modern drainage. Older Fremont bathrooms often have a 1.5-inch drain with a shallow trap. A proper conversion upgrades the drain line and valve to current code, which ends the “ankle-deep shower” complaint.
- The bathroom is the last original room in the house. In Niles and the Mission San Jose area, we regularly see one bath that’s been untouched since the 1960s while the rest of the house was updated. A conversion brings that room up without a full gut.
- You’re planning to sell within a few years. A clean walk-in shower reads better to buyers than a dated tub-and-shower combo, and it photographs well.
Our Tub-to-Shower Conversion Process
- Written scope and price. We measure the existing tub footprint, check the drain location, and confirm the valve type. You get a flat written price with a written scope and a written warranty before any demolition. Under Clause 1 of the Haven Standard, no work starts until you’ve read the number and signed off – and that quote is a real number, not “call for a quote.”
- Protect and demolish. Floors and adjacent rooms get protection. The tub comes out, the surround tile comes off, and we expose the substrate to see what’s actually there. We photograph what we find and send you the images the same day.
- Rework the drain and valve. The old tub drain is removed and a code-compliant shower drain is set to the correct slope. The valve gets replaced or upgraded. This is the part of the job that determines whether the shower drains properly for the next 30 years, and it’s also where we look carefully at the framing and any previous patch jobs.
- Waterproofing and pan. Cement board or a bonded waterproofing membrane goes on the walls, and the pan is built or set with a pre-sloped base. We use materials from our vetted brand list – Quikrete and Sakrete mortars and bed mixes, Oldcastle products where they fit the spec – and we photograph the membrane before the tile covers it.
- Tile, glass, and fixtures. Tile set, grout, the glass panel or door, the trim kit, and the fixtures. Kohler and Toto shower valves and trim are common choices, and we’ll talk you through the difference in a sentence so you’re not guessing.
- Final walkthrough and documentation. We test the drain, check the caulk lines, and hand you the photo record of the whole job plus the written warranty. Every visit includes that record as standard, not an upgrade.

Does a Tub-to-Shower Conversion Need a Permit in Fremont?
Yes – in most Fremont conversions, you’ll need a building permit because the drain, valve, and waterproofing all change, and plumbing work is inspected. A cosmetic tile swap over an existing tub usually doesn’t trigger a permit, but once the tub is removed and the drain is relocated, it does. We handle the permit application, inspection scheduling, and the corrections if an inspector flags anything. That’s part of the written scope, not a surprise line item later.
Tub-to-Shower Conversion Pricing in Fremont
Here’s what the numbers look like in Fremont’s market. These are ranges, and the final figure depends on the condition we find behind the wall – which is exactly why we photograph it before we quote the finish work.
| Line item | Typical range |
|---|---|
| Standard conversion (tub out, shower in, tile, glass panel) | $6,500 – $10,500 |
| Mid-range (larger shower, bench, upgraded tile, door) | $10,000 – $13,500 |
| High-end (frameless glass, custom pan, niche, body sprays) | $13,000 – $16,000+ |
| Drain and valve relocation | $900 – $2,200 |
| Substrate or framing repair (rot, old greenboard) | $400 – $1,800 |
| Permit and inspection fees | $250 – $700 |
What moves the number most: the drain location (moving it three feet costs more than three inches), the tile choice, the glass (frameless is a real premium), and what the wall looks like once the tub surround comes off. We don’t guess on the last one – we open the wall, photograph it, and give you a written change order if the condition is different than the original scope assumed. No change proceeds until you’ve signed it. That discipline is the reason our projects finish within a few percent of the price we agreed to.
Estimate is free and it’s written. Call (866) 797-6171 for an exact quote on your Fremont conversion.
Why Homeowners in Fremont Choose Rowan Construction Group
We quote a flat written price on every job – not a range, not a “call for a quote.” That’s the whole point of Clause 1. Our technicians have up to 19 years of experience, are background-checked and uniformed, and a live person answers the phone 24/7. You get a documented photo record on every visit, so you can see the substrate, the membrane, and the drain slope you’re paying for. And if something isn’t done right within 365 days, our 365-Day Done Right Promise means we make it right, in writing, no asterisk.
We also offer a Free Second Opinion on any written estimate. If you’ve got a competitor’s quote for a Fremont tub-to-shower conversion, bring it in and we’ll review it line by line at no charge. You’ll likely learn whether the drain relocation and permit are priced in, or whether they’re coming later as add-ons.
For the bigger picture on what’s possible in a Fremont bathroom – layout changes, vanities, lighting – see Bathroom Remodeling in Fremont or our Bathroom Remodeling service overview, and our home page for the full trade list.
FAQs – Tub-to-Shower Conversion
How long does a tub-to-shower conversion take in Fremont?
Most conversions take 5 to 10 working days from demolition to final walkthrough, plus 1 to 3 weeks for the permit to be issued before we can start. A straightforward standard conversion with no drain relocation usually lands closer to 5 days; a high-end job with custom glass and a bench runs longer. Call (866) 797-6171 and we’ll give you a realistic start date, not an optimistic one.
Is it cheaper to repair the tub or convert to a shower?
Converting to a shower is usually the better value when the tub surround is already failing, because a repair job on failing tile and drywall typically runs $1,500 to $3,500 and leaves you with the same old tub. If the surround is solid and you just want a shower, the conversion is a bigger outlay but it lasts decades. A written quote from us will show you both numbers side by side so you can compare honestly. Estimates are free – call (866) 797-6171.
Do I need to move the drain for a tub-to-shower conversion?
Not always, but often. Tub drains are centered under the tub; shower drains need to be positioned for the pan slope, and many Fremont layouts require moving the drain and trap a foot or two. That’s typically $900 to $2,200 depending on the distance and whether the floor framing needs work. We check it during the walkthrough and put the cost in the written scope before demolition begins.
Can you convert a tub to a walk-in shower for an aging parent?
Yes, and it’s one of the most common reasons customers call us in Fremont. We build low-curb and zero-threshold showers with a bench, grab bar blocking behind the tile, and a hand-held shower head – all standard options. The blocking has to go in before the tile, which is why it belongs in the original scope. Call (866) 797-6171 to schedule a walkthrough and get a written quote.
Ready for a number you can screenshot and compare? Call Rowan Construction Group Fremont at (866) 797-6171 for a free, written estimate on your tub-to-shower conversion. You’ll have a flat price, a written scope, and a photo record of what’s behind the wall – before anyone picks up a tool.
Written by the team at Rowan Construction Group Fremont, serving Fremont.


