







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterQuartz & Granite Countertops in Fremont, CA
Quartz and granite countertops in Fremont typically run $55 to $110 per square foot installed, including fabrication, and a standard 30-square-foot kitchen usually lands between $2,200 and $4,800 for the stone alone. That number includes the template, the cut, the edge profile, and the sink cutout; what it doesn’t include is backsplash tile or tear-out of the old surface, which we price separately. Rowan Construction Group Fremont writes that range onto a flat quote before anyone touches your cabinets, and we install stone sourced through the same vetted suppliers we use across every Kitchen Remodeling project. Call (866) 797-6171 and we’ll schedule a template visit.
Fremont kitchens are a specific animal. The 1960s and 1970s ranches in Centerville and Irvington have galley layouts with short counter runs, which pushes the per-square-foot price up because the fabrication cost doesn’t shrink with the length. The newer builds in Warm Springs and the Ardenwood side tend to have open plans with long single-room islands, which means we’re specifying a slab large enough to run the island in one continuous piece rather than a seam in the middle. We measure the actual substrate before we quote, because a sagging cabinet box under a 2cm stone top will crack within a couple of years and no stone warranty covers a bad base.
Our technicians bring up to 19 years of experience with quartz and granite fabrication and install. We work with Cambria and Caesarstone quartz where the customer wants a consistent pattern and no sealing, and with natural granite slabs where the appeal is the one-of-a-kind grain. Sourcing runs through suppliers including Oldcastle for slab selection and Quikrete for the undermount sink bedding. Every project carries the 365-Day Done Right Promise, backed by The Haven Standard rather than a handshake.

When You Need Quartz & Granite Countertops
- You’re replacing a laminate or tile top that’s begun to lift. Original 1970s tile counters in Mission San Jose homes are common, and once the grout lines crack and the substrate swells, resurfacing doesn’t hold. We cut out the old top and inspect the cabinet frame before templating.
- You’re remodeling the whole kitchen and the counters are the last decision. Stone usually goes in after cabinets, plumbing rough-in, and electrical, which means the timeline matters as much as the slab. We sequence the template so the install lands when the room is ready.
- You want an island but the current layout has no room for one. A larger island means a longer stone run, and the seam placement has to be planned around where you’ll actually stand. We template islands with the seam behind the prep sink where possible.
- You’re selling or refinishing to a buyer’s eye. Quartz reads as neutral and current; granite reads as solid and natural. Buyers in the Fremont market notice both, and the choice comes down to what the rest of the room is doing.
- Your existing granite has chipped or stained at the sink edge. Some chips can be repaired in place; some can’t. We tell you which one you’re looking at before quoting a replacement.
- You have a heat source near the counter and want stone that tolerates it. Granite handles a hot pan better than quartz, which can scorch under sustained direct heat. We’ll say so in writing rather than let you find out.
Our Quartz & Granite Countertops Process
- Walkthrough and written scope. We measure the existing counters, check the cabinet boxes for level and rot, and confirm the sink and cooktop dimensions. Under Clause 1 of The Haven Standard, you get a flat written price and written scope before any work starts. No “call for a quote.”
- Slab selection. You choose the stone, either from our supplier’s slab yard or from samples we bring to the walkthrough. Cambria and Caesarstone quartz give you a repeatable pattern; natural granite slabs are each unique, and we photograph the actual slab before cutting.
- Digital template. A technician templates the exact counter shape on site, including the sink cutout, cooktop cutout, and any edge profiles you’ve chosen. This is the step that catches out-of-square walls, which Fremont’s older housing stock has plenty of.
- Fabrication. The slab is cut, edged, and polished at the fabricator. This usually takes five to ten business days from template, and you get a date, not a range.
- Install. The crew removes the old top if you’ve asked for tear-out, sets the new stone on a bed of Quikrete or a similar setting compound over the leveled cabinets, and seals the undermount sink and edge. Every visit includes a documented photo record of what we found and what we did, included as standard.
- Final check and warranty. We walk the finished counter with you, confirm the seams and edges, and hand over the written warranty. Any change to the scope along the way required a signed change order, which is why the final number stays within a few percent of the quoted number.

Quartz & Granite Countertops Pricing in Fremont
Stone countertop pricing in Fremont breaks into per-square-foot bands based on material and edge, plus fixed costs for cutouts and tear-out. Here’s the honest shape of it:
| Line item | Typical range | Notes |
|---|---|---|
| Quartz, entry tier (2cm) | $55 – $75 / sq ft | Cambria and Caesarstone entry lines; consistent pattern, no sealing |
| Quartz, premium tier (3cm) | $75 – $110 / sq ft | Thicker slab, more dramatic veining |
| Natural granite | $60 – $95 / sq ft | Price varies by slab; sealing required every 1 – 2 years |
| Sink cutout (undermount) | $180 – $350 | Includes polished edge around the opening |
| Cooktop cutout | $120 – $250 | Depends on whether it’s a drop-in or flush unit |
| Edge profile upgrade | $0 – $30 / linear ft | Eased edge included; bullnose, ogee, and bevel add cost |
| Tear-out of existing top | $250 – $600 | Higher for tile over a swollen substrate |
A standard 30-square-foot kitchen with a mid-tier quartz, one undermount sink cutout, an eased edge, and tear-out of a laminate top lands around $2,400 to $3,600 in Fremont. Add a waterfall island edge or a long run with a seam, and you’re in the $4,000 to $5,500 range. The single biggest cost variable isn’t the stone; it’s the number of cutouts and whether the cabinet boxes need re-leveling first. We list both line by line so you can see where the money goes.
If you have a competing written estimate, we’ll review it line by line at no charge under our Free Second Opinion offer. We’d rather tell you the numbers don’t add up before you sign than find out after. Call (866) 797-6171 for a free estimate.
Quartz vs. Granite: What to Pick in Fremont
Quartz is a manufactured surface – ground stone bound in resin – so the pattern is repeatable and the surface never needs sealing. Granite is natural stone cut from a single slab, which means no two counters are alike and it wants a penetrating sealer every year or two. On heat, granite wins; you can set a hot pan on it and walk away. On staining, quartz wins; it won’t absorb red wine or turmeric the way an unsealed granite can.
Fremont’s dry summers and mild winters don’t punish either material the way a coastal salt-air environment would. Both handle indoor kitchen humidity without warping. The decision usually comes down to whether you want a matched pattern across an island and a perimeter run (quartz) or a single slab with visible grain that no neighbor has (granite). We’ll bring samples to the walkthrough and let the stone argue for itself.
FAQs – Quartz & Granite Countertops
How much does quartz countertop installation cost in Fremont?
Quartz countertop installation in Fremont runs roughly $55 to $110 per square foot installed, and a standard 30-square-foot kitchen typically comes in between $2,200 and $4,800 depending on the slab tier, cutouts, and edge profile. Call (866) 797-6171 for an exact written quote – estimates are free.
Can you template and install the same week?
No – fabrication usually takes five to ten business days after the template, and we won’t compress that window because rushing a polish is how edges fail. We give you a firm install date at template, not a range, and if the fabricator falls behind we tell you the same day. Call (866) 797-6171 to schedule a template visit.
Is it cheaper to repair or replace a chipped granite counter?
Small chips and hairline cracks in granite can often be repaired in place for $150 to $400, and replacement typically runs four to ten times that. The deciding factor is whether the crack goes through the slab thickness; if it does, the repair won’t hold under weight. We’ll tell you which you’re looking at before quoting. Call (866) 797-6171 for a free assessment.
Do you install quartz over existing laminate?
We don’t, and we’d advise against any contractor who offers to. Setting stone over laminate hides whatever is happening underneath – a swollen substrate, a sagging cabinet box, a warped backer – and a stone top that isn’t sitting on a level base will crack within a couple of years. Our quote includes proper tear-out and cabinet inspection. Call (866) 797-6171 to book a walkthrough.
Why Rowan Construction Group Fremont
We’ve delivered more than 4,000 projects since 2007, every one with a written price before work started and a documented record when the crew left. The 365-Day Done Right Promise means if the install isn’t right, we make it right – backed by The Haven Standard, not a handshake. Our technicians are background-checked and uniformed, a live person answers calls 24/7, and every visit includes a documented photo record as standard rather than an upgrade. For the full kitchen scope – cabinets, layout, plumbing, and lighting – see our Kitchen Remodeling in Fremont page.
Ready to put a real number on your countertops? Call (866) 797-6171 for a free estimate. We’ll bring samples, measure the actual substrate, and hand you a flat written price before anyone picks up a tool.
Written by the team at Rowan Construction Group Fremont, serving Fremont.


